Modco Industries LLC, 10650 FM 1484 Conroe, TX 77301 / Phone: 936-539-9222 / FAX: 936-622-6818
D. PREVENTATIVE MAINTENANCE:
TO INSURE TROUBLE FREE OPERATION OF THE CLOSURE, THE FOLLOWING PROCEDURES
SHOULD BE PERFORMED:
1. AT EVERY CLOSURE OPENING:
(a) ALWAYS CLEAN CAP AND SUB THREADS, AND LUBRICATE THOURGHLY.
(b) ALWAYS CLEAN O-RING, O-RING GROOVE, SUB FACE, CAP SEALING FACE, AND
LUBRICATE THOURGHLY.
2. AT REGULAR INTERVALS:
(a) LUBRICATE THROUGH GREASE ZERKS ON CAP CENTER PIN BUSHING, JIB
COLUMN HOUSING, AND TROLLEY WHEELS.
(b) LUBRICATE ACTUATOR DEVICE THREADS.
E. O-RING INFORMATION:
THE “MODCO” O-RING IS SPECIALLY DESIGNED FOR “MODCO” CLOSURES. THE O-RINGS
ARE DIE-MOLDED (FROM A CONTINUOUS MOLD) TO AN EXACT CROSS SECTION DIMENSION
TO FIT THE O-RING GROOVE. STANDARD MATERIAL IS BUNA N 70 DURO – HOWEVER
OTHER COMPOUNDS ARE AVAILABLE. CONSULT FACTORY.
To Next Page
Loading...
