NOTE: It takes about 15 minutes to reach the optimum temperature and flame size. Use Bio-ethanol fuel
(Not Included) Only! Keep fuel level lower than max mark when refueling.
Extinguishing the flame of the decorative tabletop fireplace
Place the extinguishing lid on the burner using the extinguishing rod.
Leave the extinguishing lid on for approx. 1 minute until the flame is completely extinguished.
Refilling the decorative tabletop fireplace
Let the extinguished/refuelled table fireplace cool down for at least 30 minutes.
Remove the windproof glass cover.
Fill the burner(incl. Ceramic fiber) with bio-ethanol(max. 400 ml).
Place the windproof glass cover back on the stand.
Light the burner with the extinguishing rod.
NOTE: If you meet any operation question, pls feel free to contact our Technical service
personnel:
Tel: (800)-678-7294; Email: info@oceanrockusa.com / info@oceanrockeu.com
Never fill burner that is burning or still hot. Always extinguish the flame completely and let
the burner cool down for at least 30 minutes!
Incorrect handling can lead to serious injuries or damage to the appliance. No liability is
accepted for damage due to non-observance of these instructions.
USE EXTREME CAUTION! - Danger flammable/irritant ethanol fireplace fuel is a class 3
flammable liquid and presents real danger when not used in direct compliance with all
instructions and safety warnings.
Parts of the decorative tabletop fireplace, especially the windproof glass cover, become very hot.
Therefore, keep children away even when cooling down!
Carry out cleaning and care only when it has cooled down completely.
To Next Page
Loading...