Modern Fan Co Ball User Manual

A note about our online installation instructions:
Most Modern Fan Co. products have been in our assortment for several years
or longer. As we continually work to improve product performance and user
experience, we occasionally introduce subtle (and sometimes dynamic)
product changes. These can affect the steps associated with assembly and
installation of our products depending on when a fan was produced.
709 Washington Street • Ashland, OR 97520 • (tel) 888.588.3267 • (e) info@modernfan.com
w w w . m o d e r n f a n . c o m
The instructions posted here are intended to represent our most current product versions and
configurations and the associated installation steps. If your fan or parts of your fan do not appear to
match what is included here, please contact customer service for guidance and support in
identifying which version of a fan you may have and provision of the associated installation
instructions which correspond to that version.
If in doubt, or if you have any questions at all related to assembly, installation or operation of your
fan, please contact us!

Modern Fan Co Ball Specifications

General

Type	Ceiling Fan
Motor Speeds	3
Light Kit Included	No
Location Usage	Indoor
Reversible	Yes
Blade Span	52 inches
Motor	AC
Motor Type	AC

Summary

Ball Fan Installation

Unpacking and Initial Assembly

Steps 1-3: Remove and identify contents, bottom dome, and install blades.

Light Kit Installation

Steps (a)-(e): Detailed instructions for installing the fan's light kit.

Mounting and Wiring the Fan

Steps (5)-(11): Secure hanging bracket, down rod, canopy, and make wire connections.

Final Assembly and Features

Steps (12)-(16): Canopy installation, reverse switch, dome/diffuser, wall control, and balancing.

Modern Fan Co. Control Options

Single Fan Controls (FC-001, FC-002)

Basic fan speed control and fan speed/light control for single fans.

Remote and Wireless Controls (FC-003, FC-004, FC-005)

Handheld remote, two-wire wall controls with remote, and wall controls with remote handset.

Multi-Fan Control (FC-009A/009B)

Controls for two or three to five fans on a single circuit.

Control Wiring and Configuration

Wiring Diagrams for Controls

Provides wiring diagrams for #001, #002, and #003/#004/#005 controls.

Receiving Unit Wiring (#003-#005)

Specific wiring and placement for receiving units of #003, #004, #005 controls.

Dimming and RF Channel Setup

Instructions for setting dimming function and RF channels for specific controls.