This document provides assembly and installation instructions for a "Short Tower" modular closet unit and an optional "Drawer Kits" accessory.
Short Tower Unit
Function Description:
The Short Tower is a modular closet unit designed for storage, featuring multiple shelves. It can be either wall-mounted or floor-mounted, with an optional leg extension kit for floor mounting. The unit provides organized storage space within a closet system.
Important Technical Specifications:
- Components:
- Left Side Panel (Qty 1)
- Right Side Panel (Qty 1)
- Rear Hanging Cleat (Qty 2 for standard unit, 1 for leg extension kit)
- Set Shelf (Qty 2)
- Adjustable Shelf (Qty 2)
- Cam Post (Qty 12 for standard unit, 2 for leg extension kit)
- Camlock (Qty 12 for standard unit, 2 for leg extension kit)
- Shelf Pins (Qty 8)
- Screw, Square Drive, 2.5" (Qty 4)
- Optional Leg Extension Kit Components:
- Left Leg Extension (Qty 1)
- Right Leg Extension (Qty 1)
- Wood Dowels (Qty 4)
- Dimensions (implied by installation):
- Wall mounting height: Rear Hanging Cleats are positioned 12" from the floor.
- Width: Units under 25-1/2 inches wide may only align with one wall stud.
- Construction: Utilizes Cam Posts and Camlocks for secure assembly, along with dowel pins for alignment.
Usage Features:
- Versatile Mounting: Can be wall-mounted for a floating look or floor-mounted with the optional leg extension kit for added height and stability.
- Adjustable Shelving: Includes two adjustable shelves that can be positioned at various heights using shelf pins, allowing for customization of storage space.
- Modular Design: As part of a "modular closets" system, it is designed to integrate with other components, though specific integration details are not provided in this document.
- Finished Edges: Set Shelves are installed with finished edges facing forward for an aesthetic appearance.
- Rear Hanging Cleats: These components are crucial for securing the unit to wall studs, ensuring stability and safety.
Maintenance Features:
- Assembly Tools Required (not included):
- Level
- Stud Finder
- Drill (3/32" bit size)
- Phillips Screwdriver
- Drill Bit, Square, #2
- Protective Surface: Instructions advise laying parts out on a protective surface (e.g., cardboard packaging) during assembly to prevent damage.
- Inventory Check: Users are instructed to inventory all parts against the Parts List before beginning assembly to ensure all components are present.
- Secure Fastening: Camlocks are tightened clockwise to lock components, and screws are used to secure the unit to wall studs. Proper tightening is emphasized for stability.
- Pilot Holes: Drilling pilot holes through Rear Hanging Cleats is required before securing the unit to wall studs to prevent wood splitting and ensure a secure fit.
- Stud Location: A stud finder is necessary to locate wall studs for secure wall mounting, which is critical for the unit's stability.
Drawer Kits Accessory
Function Description:
The Drawer Kits accessory provides drawers that can be installed into the Short Tower unit, converting shelf space into enclosed drawer storage. This enhances the functionality of the Short Tower by allowing for organized storage of smaller items or items that need to be out of sight.
Important Technical Specifications:
- Components (for one drawer):
- Drawer Panel, Front (Qty 1)
- Drawer Panel, Rear (Qty 1)
- Drawer Panel, Side (Qty 2)
- Drawer Bottom (Qty 1)
- Drawer Front (Qty 1)
- Drawer Slide (Qty 2)
- Shelf Slide (Qty 2)
- Drawer Knob (Qty 1)
- Screw, Drawer Slide, 5/8" (Qty 4)
- Screw, Shelf Slide, 5/8" (Qty 4)
- Screw, Drawer Front, 1.0" (Qty 4)
- Screw, Drawer Knob, 1.5" (Qty 1)
- Screw, Drawer Side, 1.0" (Qty 4)
- Construction: Drawers are assembled using wood dowels (pre-installed) and various screws. Drawer slides and shelf slides enable smooth operation.
- Compatibility: Designed to fit within the Short Tower unit, utilizing the existing shelf structure for mounting.
Usage Features:
- Enclosed Storage: Provides drawers for concealing items and maintaining a tidy appearance.
- Smooth Operation: Utilizes drawer slides and shelf slides for easy opening and closing of drawers.
- Customizable Aesthetics: Includes a drawer knob, with an option to install a 96mm drawer pull (purchased separately) for personalized style.
- Finished Drawer Bottom: The drawer bottom is installed with the finished side facing up for a clean interior.
- Pre-assembled Slides: Drawer Slides and Shelf Slides are shipped assembled and need to be separated before installation.
Maintenance Features:
- Assembly Tools Required (not included):
- Drill (5/32" bit size)
- Phillips Screwdriver
- Protective Surface: Similar to the Short Tower, instructions recommend using a protective surface during assembly.
- Inventory Check: Users should inventory parts against the Parts List before starting assembly.
- Careful Tightening: A specific note warns against overtightening screws (K) on the Drawer Front (B) to prevent dimpling of the surface.
- Leveling: A small level is recommended when positioning Shelf Slides (G) to ensure they are properly aligned before tightening, which is crucial for smooth drawer operation.
- Slide Separation: Instructions detail how to separate the drawer slides from the shelf slides by lifting a plastic catch.
- Secure Fastening: Various screws are used to secure drawer components and slides, ensuring a sturdy and functional drawer.
- Drawer Latch: Drawers slide onto shelf slides until they latch, indicating proper installation and secure closure.
Need help?
General
To Next Page
