Modus Furniture MELBOURNE FULL - User Manual

MELBOURNE FULL / QUEEN / KING BED
ASSEMBLY INSTRUCTIONS
HARDWARE PACKED IN BOX #2
WOOD SCREW (M4X30)
1 PC
1
ALLEN BOLT (M8X40)
10 PCS
6 PCS
ALLEN KEY
4
BOX #3:
D. SIDE RAIL 2 PCS
E. CENTER SLAT SUPPORT 1 PC
F. SUPPORT LEG 3 PCS
5
TOOL REQUIRED
PHILLIPS HEAD SCREW DRIVER
(NOT PROVIDED)
BOX #1:
A. HEADBOARD 1 PC
BOX #2:
B. FOOTBOARD 1 PC
C. SLAT ROLL 1 SET
A
B
C
D
E
F
3
FLAT WASHER (M8X16)
SPRING WASHER (M8X13)
2
12 PCS
12 PCS
ALLEN BOLT (M8X90)
2 PCS
6

Summary

Bed Assembly Steps

Step 1: Connect Headboard and Footboard

Attach side rails to the headboard and footboard using Allen bolts, washers, and Allen key.

Step 2: Attach Support Legs

Screw the support legs into the center slat support.

Step 3: Attach Center Support

Connect the center slat support with legs to the assembled bed frame.

Step 4: Install Slat Roll

Secure the slat roll to the bed frame using wood screws.

Post-Assembly Care and Adjustments

Adjusting Levelers

Instructions on positioning the bed and adjusting support legs for equal pressure.

Maintenance Instructions

Guidance on moving the bed, lifting it, and re-adjusting levelers.

Modus Furniture MELBOURNE FULL Specifications