Quick Reference Guide
DF6 Frequency Inverter
02/02 AWB8230-1449GB
6
Other messages
This section describes the messages issued by the DF6 frequency
inverter, for example in standby mode when mains power is
switched off.
Display Cause
The frequency inverter is in standby mode
or
a reset signal is active.
The mains voltage has been switched off.
The waiting time before an automatic
restart is counting down (PNU b001 and
b003, a AWB8230-1413GB section
“Automatic restart after a fault“,
page 132).
The default settings have been selected and
the frequency inverter is in the initialization
phase (PNU b084 and b085,
a AWB8230-1413GB section
“Initialization“, page 147). The values for
the European market (EU) are being
initialized. For non-European models,
versions for North America (USA) and Japan
(JP) are available.
Initialization of the fault history register
Copy station – copying in progress.
No data available, e.g. display under
PNU d081 and d086, when the fault history
register is empty the display under
PNU d004, when PID control is not active.
To Next Page
Loading...
