Moeller DF6-340 Series - Page 176

01/02 AWB8230-1413GB
Standard form for user defined
parameter settings
173
b092 Configuration of fan operation
• 00: Fan always switched on
• 01: Fan switched on only when motor running
–00 149
b095 Enable built-in braking transistor
• 00: Not enabled
• 01: Enabled in RUN mode
• 02: Always enabled
–00 148
b096 Voltage threshold for braking transistor [V] 720 148
b098 Selection of PTC or NTC
• 00: No temperature monitoring
• 01: PTC
• 02: NTC
–00 80
b099 Resistance threshold for thermistor input [O] 3000 80
b100 User-definable U/f characteristics,
frequency coordinates 1
[Hz] 0 111
b101 User-definable U/f characteristics,
voltage coordinates 1
[V] 0.0 111
b102 User-definable U/f characteristics,
frequency coordinates 2
[Hz] 0 111
b103 User-definable U/f characteristics,
voltage coordinates 2
[V] 0.0 111
b104 User-definable U/f characteristics,
frequency coordinates 3
[Hz] 0 111
b105 User-definable U/f characteristics,
voltage coordinates 3
[V] 0.0 111
b106 User-definable U/f characteristics,
frequency coordinates 4
[Hz] 0 111
b107 User-definable U/f characteristics,
voltage coordinates 4
[V] 0.0 111
b108 User-definable U/f characteristics,
frequency coordinates 5
[Hz] 0 111
b109 User-definable U/f characteristics,
voltage coordinates 5
[V] 0.0 111
b110 User-definable U/f characteristics,
frequency coordinates 6
[Hz] 0 111
b111 User-definable U/f characteristics,
voltage coordinates 6
[V] 0.0 111
b112 User-definable U/f characteristics,
frequency coordinates 7
[Hz] 0 111
b113 User-definable U/f characteristics,
voltage coordinates 7
[V] 0.0 111
PNU Function Units WE Page Setpoint
efesotomasyon.com - Klockner Moeller - inverter