Defining bargraphs
37
05/01 AWB27-1302-GB
Defining bargraphs The actual value can also be represented as a
bargraph.
왘 Drag open a field for the bargraph using the
mouse with the left button held down.
왘 Select ‹ Edit
➞
Data Field Type
➞
Bargraph› or
click on the Bargraph icon to define the bargraph.
Bargraph
The definition mask for bargraphs will appear.
왘 Define the bargraph as shown in the following
diagram. Now confirm your inputs by clicking on
OK.
The maximum value of 1023 corresponds to the
resolution of the potentiometer in the PS4-141-MM1
controller.
To Next Page
Loading...
