5
05/01 AWB27-1302-GB
2 Example for a Text Operator Panel
In this example you will become acquainted with the
functions used for configuring an MI4 Text Operator
Panel. In conjunction with a PLC you will be able to
test the functions of the projects afterwards. The MI4
panel is connected to the PLC via Suconet K.
Configuring the work area
The connection diagram for the project shows all of
the devices, connection points and connecting
cables required for the practice example. Instead of
the MI4-111-KE1 you could equally use a different
MI4 Text Operator Panel.
Before the MI4 can be configured the MI4-CFG-1
configuration software and the “Sucosoft S40
software for PLC programming must be installed on
the PC.
To Next Page
Loading...
