System overview
7
10/06 AWB2300-1433GB
Figure 2: Current sensors
Always use patch cables of the type ZEV-XVK-... to connect
current sensors. These are available in the following lengths
• 200 mm,
• 400 mm,
• 800 mm,
Figure 3: Supplementary external core-balance transformer
SSW... for earth fault monitoring
Auxiliary external core-balance transformers SSW... are used
for earth fault monitoring (a section “Earth fault
monitoring”, Page 14).
ZEV-XSW-25
ZEV-XSW-65
ZEV-XSW-145
ZEV-XSW-820
To Next Page
Loading...