Moen T6107 series User Manual

DESCRIPTION
• Metal construction with various finishes identified by suffix
• Designed to be installed through 2, 1-1/4" and 1, 1" min. dia holes
8" on center
• 1/2" copper connections
• Adaptable for non-8" centers
OPERATION
• Maximum handle rotation angle is 90˚ to full on for either handle
• Rotate hot side counterclockwise to open and clockwise to close
• Rotate cold side clockwise to open and counterclockwise to close
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi, for products made
before October 2008 flow is limited to 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1224 cartridge design nonmetallic/nonferrous and
stainless steel material
STANDARDS
When trim kit is added to M-Pact valve, the product is:
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
KINGSLEY™
Two-Handle Wall Mount Faucet
Models: T6107 series
Valve: 9400
2-7/8"
(73mm)
2-1/2 "
(64mm)
2-7/16" Dia.
(62mm)
2-7/8"
(73mm)
7-1/2"
(190mm)
MAX WALL THICKNESS
1-3/4” (45mm)
15˚
2-1/8"
(54mm)
3” (76mm) MIN.
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/11
M•pact™ System

Moen T6107 series Specifications

General

Model Number	T6107
Handle Style	Lever
ADA Compliant	Yes
Warranty	Limited Lifetime
Collection	Eva
Finish	Chrome
Mounting Type	Deck Mount

Summary

Product Specifications

Description and Installation

Details metal construction, installation requirements (hole size, center distance), and connection types for copper.

Operation and Flow Characteristics

Explains handle rotation angles and water flow rates, including older product specifications.

Cartridge and Standards Compliance

Specifies the 1224 cartridge design and compliance with WaterSense, CSA, ASME, lead content, and California Prop 65.

ADA Compliance and Warranty

Notes ADA compliance for lever handles and outlines lifetime limited warranty terms for residential use.

Critical Dimensions and Mounting

Provides key measurements for installation, including hole spacing, spout height, and maximum wall thickness.