EasyManua.ls Logo

Moen WICNT016G1USA - User Manual

Moen WICNT016G1USA
6 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Mount your Smart Sprinkler ControllerContents:
Requirements:
STEP 1BEFORE YOU BEGIN
Need help? We’ve got you covered.
STEP 2
Download the Moen Smart Water App
and create an account
You can find the Moen Smart Water App on the Apple App Store or the
Google Play Store. Once you’ve installed the App, create your account.
Scan to download the Moen Smart Water App
on your iOS or Android device.
USA / CA: 1-844-633-8356
Mexico: 01-800-718-4345
Visit our customer support and service website
moen.com/contact
Learn more about Moen’s smart water products,
including FAQs on this product: moen.com/smart-home
Wi-Fi
®
2.4 GHz
Magnetic
faceplate
Screws x3
Anchors x3
Power adapter Wire label
stickers
Smart Sprinkler
Controller
Screwdrivers:
Phillips and ⁄" flathead
Smartphone
or tablet
Level
*optional
30 minutes
to set-up
Plug in the AC power adapter and add your
Smart Sprinkler Controller to your account
Open the Moen Smart Water App and tap at the top of your homepage.
Follow the prompts in the App to add your Smart Sprinkler Controller to your
account if you have not already done so.
Once your Smart Sprinkler Controller is online, the light bar at the top of the
controller will light up green. You can now attach the magnetic faceplate.
Complete set-up in the Moen
Smart Water App
Now that the controller is online, use the Moen Smart Water App
to customize your zones and create schedules.
STEP 3
Before installation:
Further enhance your watering with
the Moen Smart Wireless Soil Sensor
*
Test your existing system to ensure
sprinklers are working properly.
Photograph the wiring inside
your existing controller to
reference during installation.
2. Test sprinklers
Give us a call Customer support
For safety, unplug your
sprinkler system.
3. Turn off power
Place matching wire labels on
existing wires before uninstalling
the old controller.
5. Wire label stickers
4. Phot
ograph wiring
Plug in Moen Smart Sprinkler Controller at
the installation location and follow the
prompts in the Moen Smart Water app to
register the device to your account.
Verify that your network signal is strong
enough to reach the controller. Make sure
your controller is able to connect before
proceeding with the installation.
1. Test your signal strength
Unplug and remove your existing
controller from the wall.
6. Remove existing controller
STEP 4
Connect your wires
While referencing the photo of your previous wiring and/or the applied
wire labels, insert the wires into the appropriate terminals.
# 1-16
AC
C/COM/VC
MV
Zone numbers
Power for accessories
Common wire
Master valve
F+
F-
SN
Flow meter (positive)
Flow meter (negative)
Wired rain sensors
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16AC C/COM MV
SN
SN F+ F-
Automatically skips
schedules
Only water when your
soil needs it
Custom watering
routines
Create custom watering routines based
on each zone's varying moisture needs
Know your controller
Power your controller on by connecting the AC power adapter
and plugging it into an outlet.
Pair your Smart Sprinkler Controller with our
in-ground Smart Wireless Soil Sensors.
Automatically skip schedules when your soil
moisture is above set thresholds so you never have
to worry about over-watering again. We recommend
one Smart Wireless Soil Sensor per zone.
App Store is a service mark of Apple Inc. | Google Play and the Google Play logo are trademarks of Google LLC.
© 2023 Moen Incorporated. All rights reserved. QSG00021 | W23-0212
Online
Running
Setup
Offline
Reset
Power
adapter input
Connector
has no function
Light bar
Smart Sprinkler Controller
WICNT016G1USA and WICNT008G1USA
Quick Start Guide
1. Position
Remove your Smart Sprinkler Controller’s
magnetic faceplace. Use the provided anchors if
screwing directly into drywall. Screw one of the
provided screws into the wall. The Smart
Sprinkler Controller will sit ½" higher than the
position of this screw. Leave ¼" of the screw
head away from the wall.
Hang your Smart Sprinkler Controller on
the screw from the top hole on the back
of the device.
2. Attach
STEP 6STEP 5
¼"
4. Secure
Use a level to level your Smart Sprinkler
Controller on the wall.
3. Level (optional)
Mark location for bottom anchors and screws.
Screw the last two provided screws into the
bottom two holes into the wall.
*Sold separately
30
Moen Artwork Information:
Designer: Mike Satira | mike.satira@moen.com
Native Artwork Created With: Adobe Illustrator 2022
Supplier originally printing this package: Winglee 2657
Project Number: 6396
Internal Job Number: W23-0212
Ink: 4C Process + 1 PMS Color
Color Standard
MOEN SMART WATER BLUE
(PMS 533)
Print Vendor:
Match to Pantone
Chip PMS 533
Question and Answer IconNeed help?

Do you have a question about the Moen WICNT016G1USA and is the answer not in the manual?

Summary

Step 1: Download App and Create Account

Step 2: Before Installation

Test Signal Strength

Verify network signal strength and controller connectivity at the installation site.

Test Sprinklers

Ensure the existing sprinkler system is functioning correctly before proceeding.

Turn Off Power

Safely disconnect power to the sprinkler system before any work begins.

Photograph Wiring

Document the existing wiring configuration for reference during installation.

Wire Label Stickers

Apply labels to existing wires before removing the old controller.

Remove Existing Controller

Disconnect and detach the current sprinkler controller from the wall.

Step 3: Mount Your Smart Sprinkler Controller

Positioning Mounting Screw

Prepare the wall by installing a screw for mounting, leaving space for the controller.

Attach Controller to Screw

Hang the controller onto the prepared mounting screw via the top hole.

Leveling the Controller

Use a level to ensure the Smart Sprinkler Controller is mounted straight.

Secure the Controller

Fasten the controller to the wall using the remaining screws at the bottom holes.

Step 4: Connect Your Wires

Terminal Identification and Wiring

Connect wires to the appropriate terminals, referencing diagrams and labels.

Step 5: Plug in Power and Add to Account

Connect Power Adapter

Plug the AC power adapter into the controller and an outlet.

Add Controller to App

Follow app prompts to register the online controller to your account.

Know Your Controller

Step 6: Complete Set-up in App

Further Enhance Watering with Soil Sensor

Pair with Smart Wireless Soil Sensors

Combine controller with soil sensors for automatic schedule skipping based on moisture.

Benefits of Soil Sensors

Automatically skip schedules when soil moisture is high to prevent over-watering.

Summary

Step 1: Download App and Create Account

Step 2: Before Installation

Test Signal Strength

Verify network signal strength and controller connectivity at the installation site.

Test Sprinklers

Ensure the existing sprinkler system is functioning correctly before proceeding.

Turn Off Power

Safely disconnect power to the sprinkler system before any work begins.

Photograph Wiring

Document the existing wiring configuration for reference during installation.

Wire Label Stickers

Apply labels to existing wires before removing the old controller.

Remove Existing Controller

Disconnect and detach the current sprinkler controller from the wall.

Step 3: Mount Your Smart Sprinkler Controller

Positioning Mounting Screw

Prepare the wall by installing a screw for mounting, leaving space for the controller.

Attach Controller to Screw

Hang the controller onto the prepared mounting screw via the top hole.

Leveling the Controller

Use a level to ensure the Smart Sprinkler Controller is mounted straight.

Secure the Controller

Fasten the controller to the wall using the remaining screws at the bottom holes.

Step 4: Connect Your Wires

Terminal Identification and Wiring

Connect wires to the appropriate terminals, referencing diagrams and labels.

Step 5: Plug in Power and Add to Account

Connect Power Adapter

Plug the AC power adapter into the controller and an outlet.

Add Controller to App

Follow app prompts to register the online controller to your account.

Know Your Controller

Step 6: Complete Set-up in App

Further Enhance Watering with Soil Sensor

Pair with Smart Wireless Soil Sensors

Combine controller with soil sensors for automatic schedule skipping based on moisture.

Benefits of Soil Sensors

Automatically skip schedules when soil moisture is high to prevent over-watering.

Overview

  1. Function Description
  2. Important Technical Specifications
  3. Usage Features
  4. Maintenance Features

The Moen Smart Sprinkler Controller is a device designed to manage and automate your home's sprinkler system, integrating with the Moen Smart Water Network for enhanced water management. This quick start guide outlines the installation and setup process, as well as key features of the controller and its accessories.

Function Description:

The Smart Sprinkler Controller allows users to remotely manage their sprinkler system through the Moen Smart Water App. It enables the creation of customized watering schedules for different zones, monitors system status, and can be further enhanced with smart accessories like the Moen Smart Wireless Soil Sensor for optimized watering. The controller aims to provide efficient and convenient control over your irrigation, helping to conserve water by watering only when necessary.

Important Technical Specifications:

  • Connectivity: Requires Wi-Fi® 2.4 GHz for network connection.
  • Power: Powered by an AC power adapter.
  • Wiring: Supports 16 zones, plus connections for AC power, common wire (C/COM/VC), master valve (MV), wired rain sensors (SN), and flow meters (F+ and F-).
  • Mounting: Designed for wall mounting, requiring screws and anchors (included). A level is optional for installation.
  • Dimensions (approximate, based on visual): The controller unit is a compact, rectangular device with a magnetic faceplate.
  • Operating System Compatibility: The Moen Smart Water App is compatible with iOS and Android devices.

Usage Features:

  • Remote Control: Manage your sprinkler system from anywhere using the Moen Smart Water App on your smartphone or tablet.
  • Zone Customization: Customize individual watering zones and create specific schedules for each.
  • Smart Scheduling: When paired with the Moen Smart Wireless Soil Sensor (sold separately), the controller can automatically skip watering schedules if the soil moisture is above set thresholds, preventing over-watering. This feature allows for custom watering routines based on each zone's varying moisture needs.
  • Easy Setup: The installation process is guided through the Moen Smart Water App, including steps for testing signal strength, photographing existing wiring, labeling wires, testing sprinklers, and removing the old controller.
  • Status Indicators: A light bar on the controller indicates its operational status: green for online, yellow for setup, orange for running, and red for offline.
  • Reset Function: A dedicated reset button is available on the controller for troubleshooting or re-pairing.
  • Magnetic Faceplate: The controller features a magnetic faceplate for easy attachment and removal, providing a clean aesthetic once installed.

Maintenance Features:

  • App-Based Monitoring: The Moen Smart Water App provides an overview of system usage, zone status, schedules, and sensor data, allowing users to monitor their system's performance and make adjustments as needed.
  • Troubleshooting Support: The manual provides contact information for customer support (phone and website) for assistance with installation or operational issues. FAQs and additional product information are available on the Moen website.
  • Wire Label Stickers: Included wire label stickers help organize and identify existing wiring during installation, simplifying future maintenance or modifications.
  • Simple Installation: The design allows for straightforward installation, with clear instructions for mounting and wiring, reducing the complexity of initial setup.
  • Firmware Updates: As part of the Moen Smart Water Network, the controller is likely to receive firmware updates through the app, ensuring it stays current with the latest features and improvements.

Moen WICNT016G1USA Specifications

General IconGeneral
BrandMoen
ModelWICNT016G1USA
CategoryController
LanguageEnglish

Related product manuals