Mohawk TP-18 - Page 12

MOHAWK MODEL LMF-12, TP-15,TP-16 & TP-18
5
RECOMMENDED TOOL LIST
SIZE / QTY DESCRIPTION USED IN
1 - 1/8 IN WRENCH & SOCKET WEJ-IT ANCHORS
15 / 16 IN WRENCH & SOCKET CARRIAGE STOPS
11/16 IN WRENCH HYDRAULIC LINES
5/8 IN WRENCH HYDRAULIC LINES
1/2 IN WRENCH & SOCKET BACKBOARD
7/16 IN WRENCH & SOCKET LINE CLIPS
1 RATCHET WRENCH AS NEEDED
1 SNAP RING PLIERS AS NEEDED
2IN WRENCH & SOCKET SWING ARM PINS
1 VICE GRIPS AS NEEDED
2 1/4 IN CRESCENT WRENCH AS NEEDED
1 4 FT BUBBLE LEVEL VERIFY LEVEL ASSEMBLY
1 PRY BAR MOVING HEAVY ITEMS
1 TIN SNIPS PACKAGING BANDING
1 CHALK LINE FLOOR LAYOUT
1 SOAP STONE FLOOR LAYOUT
1 25 FT TAPE MEASURE FLOOR LAYOUT / SQUARING POST
1 MEDIUM HAMMER WEJ-IT ANCHORS
1 HAMMER DRILL DRILLING CONCRETE
1 DRILL BIT (3/4 INCH) DRILLING CONCRETE
1 TON LIFTING DEVICE W/SLING LIFTING / MOVING HEAVY ITEMS
8 FT STEP LADDER ASSEMBLE ELEVATED ITEMS
100 FT LEAD CORD OPERATE ELECTRICAL TOOLS