Mojawa MOJO1 - Bluetooth Connectivity; Pairing New Devices; Automatic Reconnection; Disconnecting and Unpairing

5 丨 ENG
Bluetooth Connection
Pair for the first
time
With the headphones powered off, press and hold the Power
button for 4 seconds to enter the pairing mode. On your phone,
tap to search for the Bluetooth device named “MOJO1”.
The headphones say “Power On” and “Pairing”, and gets ready to
pair. The red and blue indicators flash alternately until the
headphones say “Source Connected” and the indicator flashes
blue for 1 second.
Connect
automatically
With the headphones (with a pairing history) powered off, press
and hold the Power button for 2 seconds to reconnect the last-
connected Bluetooth-enabled device. The headphones say
“Power On” and “Source Connected”, and the indicator flashes
blue for 1 second.
Disconnect
Disable Bluetooth on the phone for disconnection from the
headphones. The headphones say “Source Disconnected” and
gets ready to pair. The indicator flashes blue twice slowly.
Turn on
Bluetooth
With Bluetooth disabled, press and hold the Power button and
the Function button simultaneously for 2 seconds for
reconnecting through Bluetooth. The headphones say "Source
Connected”.
Turn off
Bluetooth
When Bluetooth connection is established, press and hold the
Power button and the Function button simultaneously for 2
seconds for disconnection of Bluetooth. The headphones say
“Source Disconnected”.
Unpair
Use the phone to cancel the pair with the headphones. The
headphones say “Source Disconnected Pairing” and become
discoverable again.
Reconnect
automatically
With the headphones powered on,
1. When the headphones have been paired with the phone, move
the headphones outside the Bluetooth range for disconnection;
2. When the headphones are moved back within the Bluetooth
range within 10 minutes, the headphones automatically resume
the connection with the last connected phone (if the headphones
have been paired with several devices, the headphones
automatically reconnect the last connected Bluetooth-enabled
phone), say “Source Connected”, and resume the status before
the last disconnection.
Specifications
Model: MOJO1
Speaker: Bone conduction speaker
Frequency response: 2.4GHz
Bluetooth range: 10 m
Microphone sensitivity: -36dB
Bluetooth version : Bluetooth 5.0