(Fig. 1)
(Fig. 3)
(Fig. 2)
Attach the Food Tray on the Main Unit (option)
Insert the oval parts of the food tray while the bumper and the starter backrest are
attached to the main unit into the 1st or 2nd groove from the top of the main unit. (Fig. 1)
Push the rectangular part to ensure it assembles completely with the bumper. (Fig. 2)
Turn the locks on the left and right side toward the inside and attach. (Fig. 3)
After attachment, lightly pull the tray to the front side and confirm the secure attachment.
Oval part
Lock
Rectangular
part
EN
To Next Page
Loading...
