@After pumping,pressthe power button to turn off the breastpump,lean
forward slightly, and then careful y remove the breast pump from the breast. If
there is a small amount of breast milk remaining at the silicone shield, you can
tilt the breast pump slightly to pour the remaining breast milk from the silicone
shield.
Tips:
1.This model has a built-in memory function, when you turn on the machine again,
the machine automatical y enters and up shifts to the working mode and suction
level you used last time.
2.The breast pump wil automatically stop after 50 minutes of work.
3.When you wear the breast pump, relax and sit in a comfortable chair, leaning
forward slightly (use the cushion to support your back). In this way, the silicone
shield of the breast pump can be slightly inclined upward, which facilitates the
flow of breast milk into the milk collector and reduces the residual breast milk in
the silicone shield.
Instructions for duckbill valve installation
Insert the raised part of the duckbill valve into the round hole at the bottom of
the suction bowl groove of the bra.
Picture I Picture 2
7
Duckbill valve
/Mom"ed
To Next Page
Loading...