momoDESIGN FGTR EVO - 3 VISOR; 3.1 VISOR MECHANISM; 3.2 REMOVING;FITTING THE VISOR

9
EN
FR
DE
ES
PT
РУ
中文中文
IT
日本語日本語
3 VISOR
3.1 VISOR MECHANISM
› Side cover
1
;
› Visor
2
;
› Visor fork
3
;
› Visor mechanism slider
4
;
› Slider pins
5
;
› Coupling holes
6
.
3.2 REMOVING/FITTING
THE VISOR
The visor mechanism is fitted with a locking pawl
that is released by turning it anti-clockwise.
The visor is made of scratch-resistant
polycarbonate and is fitted with perforated forks
3
that engage on the slider pins.
Only use MV1 visors.
We recommend that you carry out
the following tasks with the helmet
resting on a level surface.
1
2
3
6
6
4
5
5
3