EasyManua.ls Logo

Monaco Executive 2001 - Page 242

Default Icon
269 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chassis Information
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EXECUTIVE
7•242
Torque the Nuts Properly
• Be sure to tighten the wheel nuts to the recommended nut torque. Do not
over tighten.
• Maintain the nut torque at the recommended level through planned peri-
odic checks, or at 10,000 miles intervals, whichever comes first.
• If air wrenches are used, they must be periodically calibrated for the
proper torque output. Use a torque wrench to check the air wrench out-
put and adjust the line pressure for the correct torque.
Aluminum Wheels
Care and Maintenance of Aluminum Wheels
• Clean frequently with high pressure water from a hose. The use of mild
detergent will speed the cleaning process. Use no harsh alkaline, alco-
hol or acid cleaners. Secondary hand washing with a soft cloth may be
required to remove some stubborn road films.
• When the tires are removed, the entire wheel must be cleaned and
inspected. With a wire brush or sandpaper remove dirt, corrosion or
any foreign materials from the tire side of the rim. Do not use a wire
brush to remove dirt and corrosion for the appearance surface of the
wheel.
• To maintain the original appearance of your aluminum wheels, the fol-
lowing procedures are recommended.
1. After installing new wheels and prior to operating your motorhome, use
a sponge, cloth or soft fiber brush to wash the exposed wheel surfaces
with a mild detergent / warm water solution.
2. Rinse thoroughly with clean water.
3. Wipe dry to avoid water spots.
4. Use a high quality, non-abrasive polish to remove stubborn road tars,
insects or hard to remove deposits.
5. To protect the appearance surface on Accu-Forge wheels, wax the
cleaned surface with a high quality car wax.
6. Clean your aluminum wheels as frequently as required to maintain their
appearance.

Related product manuals