EasyManua.ls Logo

Monaco Executive 2001 - Page 79

Default Icon
269 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To operate the furnace:
• Select either diesel burner or electric element operation.
• Turn living room comfort control to ON.
• Depress mode button repeatedly until furnace is displayed.
• Select desired temperature setting using the up or down buttons.
To turn bedroom comfort control to ON:
• Depress mode button repeatedly until furnace is displayed.
• Depressing the FAN and MODE button simultaneously will alternate
between Zones One and Two. Zone One controls hallway and bathroom
exchangers. Zone two operates bedroom exchanger.
• Select desired temperature setting using the up or down buttons.
NOTE: The private bathroom room heat exchanger is controlled by
the switch in the private bathroom. The bathroom blower motor will
cycle on and off with the hallway exchanger when the toilet switch is
turned on. The private bathroom exchanger is switched due to the
amount of convection heat by the exchanger.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
If you are using your motorhome in cold weather conditions,
you will need to locate the bay thermostat next to the Aqua-Hot.
This thermostat will control the heat exchanger for holding tank
bay heat. Adjust the thermostat to 40-50° F. This will help prevent
freezing of the water system.
NOTE: The Aqua-Hot must be turned ON when using the holding
tank bay exchanger.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Monthly:
Check the Aqua-Hot's 50/50 solution of water and antifreeze to ensure its
proper level. Do this by visually checking coolant level in Aqua-Hot's
expansion tank. This should be checked only when the Aqua-Hot is at operating
temperature. Adding solution to expand the tank when the unit is cold will
result in a solution overflow when the Aqua-Hot heats to normal operating
temperatures.
Annually:
Be sure to have the Aqua-Hot tuned up early. A tune up should consist of a
fuel nozzle and fuel filter replacement, as well as a thorough cleaning of the
Appliance & Equipment
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EXECUTIVE
3•79
Furnace Operation
Bay Thermostat
Adjust the Bay Thermostat here.
Maintenance
Schedule

Related product manuals