Need help?Do you have a question about the Mondial Designs Limited HPS125 CBS and is the answer not in the manual?
General| Engine | Single Cylinder, 4-Stroke, Air Cooled |
|---|---|
| Starting System | Kick start |
| Brakes (Front) | Drum |
| Brakes (Rear) | Drum |
| Tyre Size (Front) | 2.75 x 18 |
| Tyre Size (Rear) | 3.00 x 18 |
| Displacement | 125cc |
Welcomes the owner and introduces the manual's purpose and content.
Explains safety symbols, environmental protection, and vehicle integrity warnings.
Provides guidance on cleaning the motorcycle, its parts, and handling specific stains.
Details safe handling of fuel, hot engine parts, and coolant, including warnings.
Covers engine oil, brake fluid, battery hazards, side stand use, and reporting defects.
Identifies and labels the main external components of the motorcycle.
Explains the meaning and function of various dashboard indicator and warning lights.
Details the multi-function display, meter operations, settings, and dashboard configurations.
Describes the operation of horn, turn signals, dimmer, ignition, and engine stop/start switches.
Instructions for removing seat, fuel tank cover, fuel tank, fairings, side covers, and tool kit.
Location and importance of chassis and engine identification numbers.
Lists critical checks for fuel, engine oil, coolant, brakes, clutch, tires, chain, and lights.
Covers fuel cap, fork adjustment, clutch adjustment, running-in, starting, moving off, gear shifting, and stopping.
Guidelines for safe parking, side stand operation, and suggestions to prevent theft.
Instructions for checking, topping up, changing engine oil, and replacing the oil filter.
Details spoke wheel care, tire pressure/wear, and spark plug inspection/replacement.
Covers air filter cleaning/replacement and coolant level checks/filling procedures.
Guidance on checking brake fluid levels, changing fluid, and general brake system info.
Instructions for battery use, charging, and replacing fuses.
Covers headlight bulb replacement and auxiliary light bulb replacement.
Maintenance for turn signals, tail/brake lights, and rear view mirrors.
Guidance on checking the wear of front and rear brake pads.
Procedures for vehicle inactivity, cleaning, transport, and general lubrication.
Details drive chain slack check, adjustment, lubrication, cleaning, and wear inspection.
Provides detailed dimensions, engine type, displacement, bore, stroke, and compression ratio.
Details chassis type, suspension travel, brake disc sizes, and wheel rim specifications.
Information on ignition, battery, fuses, tire specs, and spark plug type/gap.
Outlines required maintenance tasks and their intervals based on odometer readings and time.
Lists recommended engine oil, coolant, brake fluid, greases, and chain oil.
Contains forms for recording handover, initial, and periodic service confirmations.
To Next Page
