Mongoose REACT E1 - Operating the Scooter; Starting the Scooter; Stopping the Scooter

14
Note: If your scooter stops or doesn't start, you may need to
reset it: Press in the reset buon. Restart by turning the switch
on and o. Turn switch back on and start again.
Stopping the scooter
❶ Stop pressing the hand throle.
❷ Brake by pressing down on the rear wheel stop.
❸ Turn power switch o when not in use.
Starng the scooter
❶ Turn the power switch on.
❷ Grip handlebars rmly with both hands.
❸ Press the throle buon and kick to start gliding. The scooter
must be moving at 3 mph (5 kph) while pressing the throle
buon to start the motor.
❶
❸
❸
❷
❷
❶
❶
❸
Reset buon