EasyManua.ls Logo

Moni ROYAL - Page 19

Moni ROYAL
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
MAIN PARTS OF THE CAR SEAT BASE: 1. Anchor points for securing seat; 2. ISOFIX
release button with indicator for correct installation.
On both sides of the seat, press the ISOFIX button and pull the ISOFIX connectors to
the longest position. Slide the two ISOFIX connectors firmly into the inserts until the
ISOFIX connectors engage with a clicking sound on both sides. The ISOFIX button
should be green on both sides (Figure A.2).
WARNING! The ISOFIX connectors are only inserted correctly if both ISOFIX buttons
are marked green.
Press the ISOFIX base tightly against the backrest. Place the car seat with the front part
opposite to the direction of movement (the baby must be in the direction opposite to
the direction of movement). Fix the seat to the ISOFIX base as shown in illustration A.3
connect the mounting bars onto the base until they lock onto thre base by means of
an audible “click”. Use the vehicle's seat belt to secure the seat as shown in illustration
A.4.
In order to secure the car seat, use the 3-point safety belt of your car as follows:
Pull the vehicle safety belt and place it through the child’s car seat.
Connect the tongue of the belt with the buckle of the car seat and lock the safety belt.
Place the waist belt in the blue guides on both sides of the car seat. Warning! Do not
twist the belt. Tighten the waist belt by pulling the diagonal belt.
Warning! The vehicle safety belt buckle must not be placed in or in front of the blue
guide (in the direction of movement).
Pull the diagonal part of the safety belt above the upper top of the child’s car seat.
Press the diagonal belt between the blue guide and the car seat until the belt is
fastened. Warning! Do not twist the belt.
CLEANING
1. The base can be cleaned using a wet cloth. Do not use strong detergents (for example
solvents).
2.Avoid wetting the labels. Do not remove them, because they contain important
information.
Manufactured for MONI in PRC
Manufacturer and Importer: Moni Trade Ltd.
Address: Bulgaria, Sofia, Trebich, 1 Dolo Str.,
Phone number: 003592/936 07 90; Website: www.moni.bg
INSTRUCTIONS FOR MAINTENANCE AND CLEANING
CHILD SEAT INSTALLATION WITH ISOFIX BASE - FIGURE E
CHILDS HEIGHT: 40-87 cm