Monogram Sanitation
COMPONENT MAINTENANCE MANUAL
PN 15900-012 Series
38-31-07
Jan 10/95
D. Timer Assembly
(1) Except for permissible repairs described in this section, repair of the timer assembly is
not considered practicable. Replace all parts that do not meet CHECK requirements.
(2) Repair damage to painted surfaces of case and mounting plate as follows (refer to Table
601 for repair materials).
(a) Lightly sand the damaged area with aluminum oxide abrasive cloth, Federal
Specification P-C-451, Grade 600, or finer, making certain to feather edge of
sanded area into surrounding painted area.
(b) Apply a primer coat, Specification MIL-P-23377 to exposed metal surfaces.
(c) When dry, lightly sand primer as in step (a).
(d) Apply a finish coat of Gull Gray Gloss Lacquer, Color No. 32251, Specifications
MIL-L-7178.
(e) Repair electrical wiring in accordance with standard shop practices.
Page 603/604
To Next Page
Loading...