38-31-07
Monogram Sanitation
COMPONENT MAINTENANCE MANUAL
PN 15900-012 Series
Jan 10/95
Page 704
4. Storage Instructions
When the toilet assembly is to be stored after overhaul, all openings shall be sealed and, if
possible, replaced into the original shipping container. If a shipping container is not available, a
wooden framework may be built around the toilet assembly; the whole structure should be covered
and sealed with plastic sheeting. Toilet assembly shall not be stored exposed to sunlight or at
temperatures below 0°F (-17.78°C) or over 170°F (+76.67°C) for prolonged periods. Stored toilet
assembly shall be clearly marked with part number and date of overhaul.
To Next Page
Loading...