Monogram Sanitation
COMPONENT MAINTENANCE MANUAL
PN 15900-012 Series
38-31-07
Jan 10/95
3. Vendor’s Code
Vendor’s parts used in the equipment which are not altered are listed by the vendor’s part number,
vendor’s description of the part and vendor’s code listed in parentheses following the description.
Vendor’s code symbols used in this publication are taken from Federal Supply Code of
Manufacturers Cataloging Handbook H4-1 and consists of the applicable code symbol preceded by
the letter “V”. Where no code exists, vendor’s full name and address is listed in the parts list,
immediately following the description part. Following is a numerical arranged list of vendor codes.
The code identification for Monogram Sanitation has not been included in the parts list. The
absence of a code (or contractor’s name and address) following a part description means that the
item is a Monogram part, except for standard AN, MS or NAS hardware.
Page 1004
V00779 AMP Inc.
2800 Fulling Mill Rd.
Harrisburg, PA 17105-3608
V12143 Bendix Corporation
The Electrical Components Division
Santa Ana Plant
1001 S. Grand Avenue
Santa Ana, CA 92701
V27695 Devries International
1645 Reynolds Avenue
Irvine, CA 92714
V40720 Global Fasteners
3050 S. Country Club, Suite 7
Mesa, AZ 85210
V59730 Thomas and Betts Corporation
Highway 218 S.
Iowa City, IA 52240
V6K880 Precision Bearings and Supply Company
2635 S. Fairfax Avenue
Culver City, CA 90230
V76599 Murray Corporation
Greater Baltimore Industrial Park
Cockeysville, MD 21030
VENDOR’S NAME AND ADDRESSCODE
To Next Page
Loading...