Monogram Systems
COMPONENT MAINTENANCE MANUAL
BASIC PN 15900
38-31-09
Page 704
May 17/02
(3) Storage Instructions
When the toilet assembly is to be stored after overhaul, all openings shall be
sealed and, if possible, replaced into the original shipping container. If a
shipping container is not available, a wooden framework may be built around
the toilet assembly; the whole structure should be covered and sealed with
plastic sheeting. Toilet assembly shall not be stored exposed to the sunlight or
at temperatures below 0°F (-17,78°C) or over 170°F (+76,67°C) for prolonged
periods. Stored toilet assembly shall be clearly marked with part number and
date of overhaul.
To Next Page
Loading...