Monogram Systems
COMPONENT MAINTENANCE MANUAL
BASIC PN 15900
38-31-09
Page 1004
May 17/02
3. Vendor's Code
Vendor's parts used in the equipment that are not altered are listed by the vendor's part
number, vendor's description of the part and vendor's code listed in parentheses following
the description. Vendor's code symbols used in this publication are taken from Federal
Supply Code of Manufacturers Cataloging Handbook H4-1 and consists of the applicable
code symbol preceded by the letter "V". Where no code exists, vendor's full name and
address is listed in the parts list, immediately following the description of the part.
Following is a numerically arranged list of vendor codes. The code identification for
Monogram Systems has not been included in the parts list. The absence of a code (or
contractor's name and address) following a part description means that the item is a
Monogram part, except for standard AN, MS or NAS hardware.
CODE VENDOR'S NAME AND ADDRESS
V00779
AMP
2800 Fulling Mill
Harrisburg, PA 17105
V12143
Bendix Corporation
The Electrical Components Division
Santa Ana Plant
1001 S. Grand Avenue
Santa Ana, CA 92701
V27695
Devries International
1645 Reynolds Avenue
Irvine, CA 92714
V40720
Global Fasteners
3050 S. Country Club, Suite 7
Mesa, AZ 85210
V59730
Thomas and Betts Corporation
Highway 218 S.
Iowa City, IA 52240
V6K880
Precision Bearings and Supply Company
2635 S. Fairfax Avenue
Culver City, CA 90230
V76599
Murray Corporation
Greater Baltimore Industrial Park
Cockeysville, MD 21030
To Next Page
Loading...