2 7
This euipment supplies microgranular insecticide andor helicide during sowing.
The microgranules are conveyed to the planter metering units through the eect of gravity via the telescopic downpipes. The
metering box drive system is mechanical and the doseha is adjusted by means of a variator.
This transmission is euipped with a disengaging mechanism to stop the supplying of the product.
ries release engagement
To temporarily stop the distribution of micro-pellets, put selector B on 0.
In order to re-launch distribution, put selector B back at the desired setting from 1 to 10.
No adjustement between 0 and 1.
In order to avoid any risk of clogging up of the product in the units during transport, travel with hoppers empty.
The emptying chute B is easily xed on to the Microsem unit and enables an easy emptying of the hopper.
A The delivered hoses have extra length. They should be cut as short possible to avoid bends. This should be
done while the planter is in a HOOKED UP and RAISED position.
A Avoid moisture contamination. This unit should be used only with microgranulars and not with powders or
granulates. It is possible to meter large granulars provided the inside auge is changed for a special one. A name plate,
located at the back of the unit, allows you to uickly identify what type of unit it is I insecticide worm g. 1.
The 2-row metering box can be changed into a 1-row box by replacing the double outlet with a single outlet and sliding a
shield in the inside.
Szerződésen kvüli fényképek.
Фотографии имет информационный характер.
Non-contractual photographs.
To Next Page
Loading...
