S502 26” Electric Bicycle
©2019 MONSTERPRO 5
Installation Video Guide is available at https://youtu.be/IxizeeLlpqU
Handlebars
Carefully place the bicycle assembly on a flat surface so that it rests on the front fork and rear wheel.
Place and slide the handlebar assembly centrally into position in the clamp, rotate the handlebar
assembly, as required, so it is aligned "square" to the front fork. That is, the handlebar will be at 90° to the
bicycle frame when the front wheel is straight.
Using an Allen key and torque wrench, tighten the screws to the torque.
To Next Page
Loading...