How to fix a Monte Carlo Fan Company Fan that does not start?
If your Monte Carlo Fan Company Fan doesn't start, first check the main and branch circuit fuses or circuit breakers. Then, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Finally, ensure the dip switches on the transmitter and receiver are set to the same frequency.
What to do if the light on my Monte Carlo Fan Company Fan does not work?
If the light on your Monte Carlo Fan Company Fan isn't working, start by checking the wire connections from the fan to ensure they're connected to the hot wire from the house. Next, examine the fan switch housing and light kit for any loose or disconnected wires. Also, check for faulty light bulbs. A warning: Using bulbs with incorrect wattage can cause the lights to shut down. Reset the lights by turning off the wall switch, breaker, or by remote. Replace bulbs with the correct wattage bulbs, then turn the power on.
How to reduce noise from my Monte Carlo Fan Company 5WS52XXD-L Fan?
If your Monte Carlo Fan Company Fan sounds noisy, ensure all screws in the motor housing are snug, but not over tightened. Check that the screws attaching the fan blade holder to the motor are tight. Make sure wire nut connectors in the switch housing aren't rattling against each other or the housing's interior. Avoid using solid state variable speed controls, as some fan motors are sensitive to their signals. Also, allow a 24-hour "break-in" period, as most new fan noises disappear after this time.
General| Blade Span | 52 inches |
|---|---|
| Number of Blades | 5 |
| Motor Type | AC |
| Downrod Length | 4.5 inches |
| Remote Control | Yes |
| Mounting Type | Downrod Mount |
| Material | Metal |
| Motor Speed | 3 speeds |
| Finish | Brushed Nickel |
| Warranty | Lifetime |
To Next Page
