To Next PageTo Next Page
Need help?Do you have a question about the Monte Carlo Fan Company Dylan 3DYR56 Series and is the answer not in the manual?
General| Brand | Monte Carlo Fan Company |
|---|---|
| Model | Dylan 3DYR56 Series |
| Category | Fan |
| Language | English |
Covers fire, electric shock, injury risks, proper installation, and pre-operation checks. Includes warnings on wiring, cutting, drilling, and blade handling.
Addresses requirements for isolating wall controls, specific fan speed control compatibility, and avoiding variable speed controls.
Details safety for mounting to outlet boxes, support requirements, and installation of secondary safety cables.
Covers safety for light kit installation and operation, and suitability for wet locations.
Ensures power is off at the service panel and the outlet box is properly installed and suitable for fan support.
Details using a suitable metal outlet box and securely attaching the mounting bracket with provided screws.
Covers threading wires, installing the downrod, cross pin, keeper pin, and yoke cover with critical safety warnings.
Instructions for threading wires and safety cables through a watertight rubber cover and installing a cable clamp.
Guides on aligning the downrod ball slot with the mounting bracket tab for secure attachment.
Specific instructions for installing the safety cable into house structure beams for Canadian and USA installations.
Details on making wire connections to the receiver and installing the receiver into the mounting bracket.
Guides on raising the canopy, aligning it with the mounting bracket, and securing it with screws.
Instructions for installing blade brackets onto the motor using set screws and ensuring they are securely tightened.
Steps to install a decorative cap onto the motor shaft by turning it clockwise until it is tight.
Details on aligning fan blades with the blade bracket and securing them with provided set screws.
Instructions for installing the battery in the remote transmitter and recommendations for storage.
Explains how to set up the remote in Universal Mode or Learning Mode for fan control.
Step-by-step guide to perform the learn function setting by restoring power and pressing the LEARN button.
Details on the receiver's lock protection for obstructions and overload protection for current limits.
Explains how to use the remote buttons to control fan speed (1-6) and fan rotation direction (forward/reverse).
Note on the remote's auto resume function, which maintains the last setting when power is turned off.
Instructions for installing the transmitter wall mount cradle using screws.
Statement regarding compliance with FCC Rules, including conditions for operation and interference.
Provides tips for end users on automatic operation, troubleshooting, controlling multiple fans, and fan shuttering.
Checks for circuit issues, wiring connections, forward/reverse switch position, and remote controller settings.
Addresses loose screws, blade holder tightness, wire nut connections, light bulb socket, and break-in periods.
Covers mounting bracket engagement, canopy/bracket tightness, blade/holder screws, blade level adjustment, and blade interchange.
Checks for blue wire connection, loose wires in switch housing/light kit, bulb tightness, and remote controller settings.
