7
5th Brakes
Right lever – front brake
Left lever – rear brake
The brake tension path is 10-20 mm. The vehicle usually has a front disc brake and a
rear drum brake. Adjustment can be done by turning clockwise with the brake cable
adjustment screw.
Note: The tension path means the distance between the position when the vehicle is
driving at a normal pace and starts braking and the moment the vehicle stops. Attention
should be paid to the sensitivity of the vehicle.
Before you start driving, check:
• if there are no leaks
• whether there are any leaks or scratches on the stamped wire
• abrasion of brake pads
• that the distance between the normal position of the front brake and the handlebar
handle is 10-20 mm
To Next Page
Loading...