21
Wear, incorrect closing or incorrect switching of valves cause incomplete fuel
combustion. They should be periodically inspected and adjusted. If they are clearly
worn out, they should be replaced with new ones. It is especially important to properly
set the valve clearances so that they give a good enough mixture.
Change the engine oil
When changing the engine oil, the level must not exceed the upper value: if the oil level
is too high, the oil pressure increases, which can cause leaks from the engine and
increased oil consumption.
Correctly set ignition time
Only an intense ignition spark can cause full combustion and full engine power, fuel
savings and less emission of harmful substances into the environment.
Carry out repairs of the engine and vehicle inspections
An old and worn engine causes fuel losses and high engine oil consumption. Engine
overhaul must not be delayed in time. A combustion and ignition system maintained in
good condition provides energy savings and environmental protection.
Battery disposal
When buying a new battery, the old battery should be returned to the battery disposal
To Next Page
Loading...