50
Raise the front rail at each corner and tuck the roof
fabric between the folds of the rear window.
Pull out the roof section fabric so that it sits neatly
over the tail of the vehicle.
FOLD 1
FOLD 2
Begin lifting the hood from the front rail. Carefully
make a neat fold through the rear window panel.
Continue to tilt the hood backwards while making a
second fold between the window and roof section.
Lower the roof fully onto itself, making a third fold.
The main roof fabric should be pulled backwards
over the tail as the roof frame folds down to avoid
the scissor action of the mechanism.
WARNING Ensure the high level brake light is
not covered by the fabric from the hood.
HOOD DOWN PROCEDURE
Make sure both sprung catches are properly aligned
with their holes at the rear of the vehicle. Push down
vigorously over each spring catch to lock in place.
The press studs are behind the trailing edge of the
doors. Lift the outer ring and pull to release the side
of the hood from the vehicle.
WARNING Failure to release the press studs
before lowering the hood can damage
the vehicle body work.
To Next Page
Loading...
