Morgan PLUS SIX - Oil Level Monitoring

Plus Line Owner’s Handbook - Version 1.0
33
Oil Level
It is recommended that an oil level check is carried out periodically.
To activate an oil level measurement, the vehicle should be:
1. Parked stationary on a level surface.
2. Park or Neutral gear selected and handbrake on.
3. The engine on and running at normal operating temperature.
Engine Oil Level
PRESS the right stalk button to cycle through to the
Engine Oil Level. The reading displayed defaults to
the last measurement.
Oil Level Measurement
With the Oil Level Menu selected, HOLD the
right stalk button to summon a new measurement.
An hour glass icon appears while a measurement
is active and the engine revs will increase. Do not
operated the vehicle during this time.
0
2
1
0
Int
0
2
1
0
Int
No Measurement Available
If the above icon is displayed, either one or more
of the conditions listed above are not met, or
there is a problem with obtaining a measurement.
2/4
0
2
1
0
Int
2/4
DRIVER INFORMATION PANEL
It may take approximately 2 minutes to complete a measurement. During
this time, the engine may run at higher revolutions that normal. Do not press
pedals or leave the vehicle unattended whilst the measurement is active.
WARNING Do not use engine oil level screens while driving the vehicle.