EasyManua.ls Logo

Morgan +8 - Technical Information; GENERAL SPECIFICATION

Morgan +8
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GENERAL SPECIFICATION
Engine Rover V8
Bore of cylinder (mm) 94.00
Stroke (mm) 71.12
Compression ratio 9.35:1
Cubic capacity 3950cc
Firing order 1L,8R,4R,3L,6R,5L,7L,2R
Power (kw @ rpm) 140 @ 4800
Torque (NM) 305 @ 3500
Valve operation Central camshaft, pushrods to overhead valves,
hydraulic tappets.
Valve timing: Inlet 39° BT 28° AB
Exhaust 77° BB 66° AT
Oil capacity: Engine (refill) 10.0Pts/5.7 Lts/12 US Pts
Gearbox 2.8 Pts/1.6 Lts/3.36 US Pts
Rear axle 1.75 Pts/1.0 Lts/2.1 US Pts
Water capacity 24 Pts/42 Lts/28.8 US Pts
Cooling system Water pump, radiator(15lb/in²) electric fan and
thermostat (88°C) (antifreeze Page 5)
Petrol 95/98 Octane unleaded only
Tank capacity 12.5 Gall/56 Lts 15 US Gall.
Ignition System
Type Lucas Dis 2
Ignition timing 4° ± BTDC @ 750 rpm
Spark Plug types Champion RN11YC
Spark Plug gap 0.9mm/0.035"/0.040"
Carburation type Lucas Gems hot wire electronic injection
Fuel Pump pressure 26-36 PSI/1.8-2.5 BARI
CO Reading 0.5/1.0%
Front Wheel Alignment and Suspension
Castor angle
Camber 1° NEG ± 0.5°
Kingpin inclination
Toe-in 0 to
1
/
8
" (0 to 3.2mm)
Weights
Complete with tools and petrol 940kg (2,068lb)
2
Plus 8 4.0
Technical Information
Technical
Information
All specifications are subject to alteration without prior notice

Related product manuals