¨
Cover-/End-Stop-Plate
For assembly in Cover-Station.
Cover-End-Stop-Plate for:
Cover Clamp Station
It has to be mounted in back side of Cover Clamp
Station by:
2 Phillips-Head-Screws, which are already
screwed-in in machine to be fixed by Phillips-Screw
Driver through the:
2 holes in top side of Cover-Endstop-Plate.
Back-Paper-Guide-Plate
for assembly on Clamp-Assy.
Back-Paper-Guide-Plate
Paper-Clamp-Assembly
It has to be mounted on back clamp of paper-
clamp-assy by:
2 Phillips-Head-Screws, which are already
screwed-in on back-clamp of clamp-assy to be
fixed by Phillips-Screw Driver.
Book-Cooling-Stand
Book-Cooling-Stand
Place ready bound books for cooling of spine/glue
¨
To Next Page
Loading...
