3. Components & Features
1) This perfect binder FKS PrintBind KB 2000 is designed for professional binding results with hot
melt adhesive. The layout of the main components and features are based on professional
standards and state of the art technology.
Special features incorporate unique functions as like as the spine preparation for better glue
penetration into set of papers.
The extremely strong pneumatic operated clamping for paper-set and cover-binding creates perfect
binding results.
Pre-scoring of cover-sheets only is recommended for the upper level of card board qualities.
The heavy duty construction led to a sturdy layout of the machine for constant use and long life time.
The automated operation procedure guarantees equal steps of finishing binding for binding.
The human operator only has to take care for correct loading of papers to be bound and cover to be
positioned in cover-station.
2) The operation procedure concentrates on pushing buttons for simplicity of use.
3) The unique spine preparation consists of a most modern designed Slitting Device in combination
with a Fanning Device which slightly fans the spine (The Fanning Device is not designed for
scuffing the spine!) prior to glue attachment.
4) After clamping the set of papers to be bound in right hand positioned clamp device, the whole
process of binding incorporates the spine preparation, glue attachment and cover clamping onto the
book in one step of operation by simply touch the start-button..
5) This “One-Touch-Operation” enables one operator to achieve up to 320 bindings per hour.
6) Various safety features, devices and functions prevent failures in binding and make sure a high
level of safety to the operator.
Safety hood
for coverage of hot glue-assy area and spine
preparation device.
By lifting up the Safety Hood the clamp action stops
and main drive is out of action..
The glue remains it´s temperature.
If required the paper can be removed from clamp by
touch button on main panel and as well the clamp will
return to home position.
Emergency Stop
To be used in case of any kind of accident. Main
drive will be disengaged.
Further procedure as per description for Safety Hood.
Reset by turning the red head on knob.
To Next Page
Loading...
