5
Features
(1) Ring Pull
(2) Lid
(3) Spout
(4) Water Gauge
(5) Handle
(6) Illuminated* On/Off Switch
(7) Cordless Base
(8) Cord Storage (underneath)
(9) Filter
(10) Filter Location Tab
(11) 360° Connector
*Selected models only
Before first use
Before using your kettle for the first time, fill with water, boil and
pour away.
Using your kettle
1
Fill the kettle with water by removing the Lid (2), or through the
Spout (3). Do not fill past the MAX line.
2
Place the kettle on the Cordless Base (7) and press the On/Off
Switch (6).
3
When boiled, the kettle will automatically switch off. Remove from
the Cordless Base (7).
4
Pour the water from the kettle. CAUTION: The kettle and the water
will be hot.
Removing the filter (9)
5
1 Open the Lid (2).
2 Pull the Filter Location Tab (10), push the Filter down to unhook
from the lip of the kettle and pull away.
3 To re-fit the Filter
6
, slide it up into the lip of the kettle and push
the Filter Location Tab into the catch below the Spout (3).
WARNING: The Filter must always be fitted to the kettle.
Cleaning your kettle
• WARNING: Always disconnect the plug from the mains and allow
your kettle to cool before cleaning.
• Wipe the outside with a damp cloth.
• IMPORTANT: Do not use abrasive cleaners on the outside of
the kettle which may scratch the surface.
Descaling
IMPORTANT: As this appliance is fitted with a concealed
element it must be descaled regularly. The frequency of
descaling depends on usage and the hardness of the water in
your area.
Excessive scale can cause the appliance to switch off before
boiling and may damage the element invalidating the warranty.
It is essential that regular descaling takes place.
Remove hard scale using a proprietary descaling product suitable
for stainless steel, glass or plastic. Please follow the instructions
carefully.
Alternatively use citric acid crystals (available from most
pharmacies) as follows:
1 Fill the appliance 3/4 full, boil, then unplug the appliance (remove
the cordless kettle from the base unit) and stand it in an empty
sink or bowl.
2 Gradually add 50g of citric acid crystals to the water, then leave
the kettle to stand. Do not use a more concentrated solution.
3 As soon as the effervescence subsides, empty the appliance and
rinse it thoroughly with cold water.
4 Wipe the outside of the appliance thoroughly with a damp cloth to
remove all traces of acid which may damage the finish.
IMPORTANT: Ensure that the electrical connections are
completely dry before using the appliance.
Contact us
Helpline
If you are having a problem with your appliance, please call our
Helpline, as we are more likely to be able to help than the store
you purchased the item from.
Please have the product name, model number and serial
number to hand when you call to help us deal with your enquiry
quicker.
UK Helpline: 0844 871 0960
IRE Helpline: 1800 409 119
Spares: 0844 873 0726
Talk To Us
If you have any questions or comments, or want some great
tips or recipe ideas to help you get the most out of your
products, join us online:
Blog: www.morphyrichards.co.uk/blog
Facebook: www.facebook.com/morphyrichardsuk
Twitter: @loveyourmorphy
Website: www.morphyrichards.com
g
t
g
f
d
e
p
i
q
v
}
≈
∂
KT101402MEE Rev1_Morphy Richards IB 07/01/2014 13:00 Page 5
To Next Page
Loading...
