7
T
he anti-drip valve È will prevent
any remaining coffee dripping onto
t
he hot plate during serving. Ensure
that the jug is replaced on the hot
plate after serving.
We suggest consuming your coffee
w
ithin two hours, after this time we
suggest brewing another jug of
f
resh coffee.
W
ARNING: The coffee maker
and hot plates are hot and
r
emain hot for some time after
switching off.
NOTE:
• Remember to turn off the machine
when you have finished.
• Allow the unit to cool.
• Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
• Thermal Carafe Variants
• When the brewing process is
complete the product remains on,
we recommend you switch off your
coffee maker as soon as brewing is
complete.
• The thermal carafe will keep the
coffee warm in the jug for up to
‡/· four hours.
• The anti drip valve È will prevent
any remaining coffee dripping onto
the base recess during serving.
• We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
• WARNING: The coffee maker
and hot plates are hot and
remain hot for some time after
switching off.
NOTE:
• Remember to turn off the machine
when you have finished.
• Allow the unit to cool.
• Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
DIGITAL INTERFACE
VERSIONS
„
Set the clock
•
When the machine is plugged in,
the display will flash 12:00 dimly.
• To set the time press the hour
b
utton ˆ and minute buttons ˜ to
reach the desired time.
NOTE:
T
he clock is a 24 hour clock.
T
he clock will be reset, each time
the product is unplugged at the
wall.
Making coffee
1 Press the push button fi to open
the hinged lid. The lid will
automatically rise G.
2 Using the jug, fill the water reservoir
¤ with the required amount of
water using the level indicator Ê as
a guide. Both the jug and water level
indicator are marked in cups H.
3 Spoon ‹ the required amount of
ground filter coffee into the mesh
filter › spreading evenly. We
suggest one level measuring spoon
for every cup. Ensure the filter is
sitting properly in the filter holder I.
4 Close the lid. Ensure the lid is
closed and latched properly, J
otherwise the machine will not
function correctly.
5 Slide the jug ‡/· into the coffee
maker ensuring it sits correctly on
the hot plate K. The jug lid must be
in place during the brewing process;
otherwise the non drip valve will not
open, causing the filter to flood.
• Thermal Carafe Variant
NOTE:
Thermal carafe versions have no hot
plate. Please ensure the jug sits
correctly on the base recess.
• Ensure the jug · lid is fully closed
by turning the lid clockwise, this
ensures the maximum temperature
is maintained in the jug. To ensure
the coffee is kept as warm as
possible we advise you rinse your
thermal carafe in hot water before
use.
g
G
H
I
J
K
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 7
To Next Page
Loading...
Need help?
General
