8
•
Please note the jug lid must be in
place during the brewing process;
o
therwise the non-drip valve will not
open, causing the filter to flood.
6
Select the required strength of
coffee using the strength selector
o
n the lid L.
7
Press the power on/off selection
button Û. The display lights up
b
rightly and the cup selection
indicator will flash showing the
p
revious selection.
N
OTE:
If the machine has been unplugged
from the wall socket since the last
operation the previous selection will
be cleared, the default setting will
be applied (1 full carafe).
8 Press the cup selection button ¯ to
select one of the available options,
1/2 carafe or full carafe M
depending on the number of cups
required. Refer to ‘Cup selection
function’ page 11 for further
information. The selection indicator
will stop flashing, if no buttons are
pressed for 2 seconds the machine
will begin the brewing process.
9 The brewing indicator ˘ will start to
illuminate from left to right indicating
that brewing is in progress, hot
water will start to flow through the
coffee grounds and into the jug as
coffee ·.
• Glass Carafe Variant
When the brewing process is
complete the product will
automatically switch to keep warm
; the brewing indicator ˘ will
stop illuminating from left to right.
All segments will remain solidly
illuminated indicating the machine is
in keep warm state. The indicator
has now changed from a brewing
indicator to a quality indicator. Refer
to ‘Coffee Quality indicator’ page 11
for further information.
The automatic keep warm
function will keep the coffee warm
in the carafe until the product is
switched off.
For safety reasons the coffee maker
will automatically switch off after
two hours.
T
he anti-drip valve È will prevent
any remaining coffee dripping onto
t
he hot plate during serving. Ensure
that the jug is replaced on the hot
plate after serving.
We suggest consuming your coffee
w
ithin two hours, after this time we
suggest brewing another jug of
f
resh coffee.
W
ARNING: The coffee maker and
hot plates are hot and remain hot
f
or some time after switching off.
N
OTE:
• Remember to turn off the machine
when you have finished.
• Allow the unit to cool.
• Remove the permanent filter and
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
• Thermal Carafe Variant
When the brewing process is
complete the product remains on,
the brewing indicator ˘ will stop
illuminating from left to right, all
segments will remain solidly
illuminated, the indicator has now
changed from a brewing indicator to
a quality indicator. Refer to ‘Coffee
Quality indicator’ page 11 for further
information.
If the coffee is to be consumed
immediately we recommend
switching off your coffee maker as
soon as brewing is complete.
NOTE:
If you switch off your coffee maker
the coffee quality indicator will turn
off and reset.
The thermal carafe will keep the
coffee warm in the jug for up to four
hours.
For safety reasons the coffee maker
will automatically switch off after
two hours.
The anti drip valve will prevent any
remaining coffee dripping onto the
base recess during serving.
We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
L
M
CM47060MCZ-Q6:9225 47507 MEE pump - Jon 7/1/08 10:18 Page 8
To Next Page
Loading...
Need help?
General
