Morphy Richards Total Control Instruction Manual

3
p
f
d
i
q
}
∂
g
5
2
4
1
6
15
16
7
8
12 13 1411
9
3
1
2
Rear of the Base Unit
10
might damage the cable.
• The mains cable should reach from the socket to the base unit
without straining the connections.
• The power cord cannot be replaced. Contact Morphy Richards for
advice.
Other safety considerations
• Do not use the appliance for anything other than its
intended purpose.
• The use of attachments or tools not recommended or sold by
Morphy Richards may cause fire, electric shock or injury.
• WARNING: Misuse of appliance could cause personal injury.
Product specific safety
• IMPORTANT: Allow hot liquids to cool before adding to the
blender, always ensure the lid is fitted correctly.
• Be careful if hot liquid is poured into the blender as it can be
ejected out of the appliance due to sudden steaming.
• Do not use the appliance if the plastic jug or lid is damaged or
has visible cracks.
Electrical requirements
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity supply which
must be A.C. (Alternating Current).
Should the fuse in the mains plug require changing,
a 5 amp BS1362 fuse must be fitted.
WARNING: This appliance must be earthed.
FP403040MEE Rev1.qxp_Morphy Richards Instruction Book 11/07/2016 17:38 Page 3

Morphy Richards Total Control Specifications

General

Type	Immersion blender
Product color	White
Removable bowl	Yes
Country of origin	China
Bowl capacity	0.75 L
Number of speeds	8
Power source	AC
Package depth	260 mm
Package width	250 mm
Package height	246 mm
Package weight	2280 g
Pallet height	1726 mm
Pallet weight	153920 g
Quantity per pallet	48 pc(s)
Quantity per pallet layer	16 pc(s)
Number of layers per pallet	3 pc(s)
Number of cartons per pallet	12 pc(s)
Number of cartons per pallet layer	4 pc(s)

Weight and Dimensions

Depth	65 mm
Height	390 mm
Weight	1719 g