EasyManua.ls Logo

Morra MH 540 - Page 4

Default Icon
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The Morra Rotary Tedder has been designed as a simple, easily maintenance machine.
Thus if there are problems with its working performance, the most likely cause is to be found in worn
working parts. Change these as needed but use only genuine original parts which are available from your
local Morra dealer.
Continuous improvement of our products is of prime importance to MORRA technicians.
We therefore reserve the right to make all variations to our machines as are considered necessary at any
moment, without advance warning and without being obliged to consequently modify already sold
machines.
MORRA - Roreto di Cherasco - Cuneo (I) - guarantees all first purchasers of a brand new MORRA machine
against all manufacturing defects so long as the maintenance recommendations given in this instruction
manual have been fully complied with. Failure to comply with such recommendations shall void guarantee
itself.
The guarantee should equally be considered void if the machine is modified without the written approval of
MORRA when repairs are carried out using non genuine spare parts, or be means of unauthorized
workshops.
The guarantee covers sole replacement or reimbursement of those parts recognized as being defective by
our Technical Department.
Besides the above, MORRA shall not be obliged to pay any indemnity or compensation for whatsoever
reason this may be requested.
Claims under guarantee shall be forwarded to the Dealer or authorized Workshop which made the sale
alone, or straight to our offices in the case of direct sale.
It is advisable to check all goods sold away from our premises on delivery, in order to see they have not
been damage during transport: "any claims should be presented within and not later than six days after
delivery"
The machine is identified by characteristics data:
- Model: …………..
- Incremental number: …..
- Year of manufacture: ……
stamped on the plate attached to the machines' chassis. Always, specify this information when ordering
parts of requesting information.
Use only original spare parts available at your local Morra dealer.