6. Refuelling of your stove should be done while
there are still glowing embers in the bed. Spread the
embers across the bottom, but concentrated most-
ly towards the front of the stove.
7. Place two pieces of fuel weighing roughly 0.7 kg
and measuring about 25 cm in length across the
embers in one layer, with spacing of roughly 1 cm
between the pieces of wood.
8. When the secondary air supply is opened all the
way and the door is closed, the new fuel will ignite
in a few minutes.
9. Once the new fuel has taken, adjust the secondary
air amount to the desired setting; optimal combus-
tion will continue until glowing embers are produ-
ced.
Under normal chimney draft conditions, expect to
refuel your stove every 60 - 70 minutes.
10. A new charge of wood can be added by repea-
ting steps 6 & 7.
To Next Page
Loading...