Connect smartphone to
your Wi-Fi network (with
the Internet).
STEP 3
STEP 4
For the rst connection, place
the camera as close to the
router as possible (1-6ft).
Note. If the router supports
two frequencies, use a 2.4 GHz
network when connecting.
1-6 ft
STEP 1
STEP 2
Connect power to the camera.
Wait for the camera to load
(approximately 1 minute).
There is a «Reset» button
at the back of the camera.
Hold this button for about
7-8 seconds. You will hear
a characteristic sound.
After a successful reset,
the camera will emit three
short «beep beep beep»
sounds.
STEP 5
STEP 6 STEP 7
Download and install
the Smart Life app in
the App Store or the
Play Market.
Go to the Smart Life
app and register a new
account.
Go to the Smart Life app.
Click «Add Device».
First select the «Video
Surveillance» category.
Then select «Smart
Camera» from the list.
To Next Page
Need help?
General
