Need help?Do you have a question about the Mosa GE 4500 HSX and is the answer not in the manual?
Instructions to read the manual attentively to prevent operational issues.
Information regarding manuals and documentation provided with the machine.
Advice for engine installation and operation, including fueling and safety.
Electrical safety checks and static electricity precautions during operation.
First aid measures for accidental exposure to corrosive liquids or hot gas.
First aid and extinction means in case of fire.
Installation advice for gasoline engines regarding ventilation and exhaust.
Installation advice for diesel engines regarding ventilation and exhaust.
Safety precautions when moving the machine, ensuring it is turned off.
Guidelines for placing the machine on a level surface and avoiding floods.
Proper positioning and maximum allowed leaning angle for the machine.
Instructions for activating and preparing the maintenance-free battery.
Explanation of the oil alert system that prevents engine damage due to low oil.
Reference to the motor manual for recommended lubricant viscosity.
MOSA's recommended AGIP engine oils for the unit.
Instructions to check the dry air filter for proper installation and leaks.
Safety warnings and procedures for fueling the machine, especially with gasoline.
Importance of proper grounding for safety and the GFI switch function.
Step-by-step guide for starting the generator from the local control panel.
Information on starting the unit via remote control devices like TCM or EAS.
Using the TCM control device for starting the generator.
Automatic start-up management via the EAS panel.
Procedures for stopping the motor from the front panel in normal or emergency situations.
Operating procedures for shutting down the generator via the TCM.
Automatic shut-down control managed by the EAS panel.
Shutting down the generator using the TCM remote control or EAS panel.
Ensuring efficient ground connection and verifying voltage for AC output.
Setting the GFI switch to ON and verifying nominal voltage for the 230V version.
Configuring the 110V/230V switch and power output for the dual voltage version.
Explanation of the overload protection feature and how it intervenes.
Function of the GFI switch for protection against indirect contact and fault reset.
Procedures for resetting thermoprotection and verifying causes of intervention.
Using the generator for DC output, mainly for recharging batteries.
Connecting and using the TCM 15 for remote starting and stop functions.
Connecting and using the TCM 6 for starting, stopping, and oil pressure indication.
Periodic maintenance checks for generating sets with automatic operation boards.
Procedures for storing gasoline engines, including draining oil and fuel.
Procedures for storing diesel engines, including periodic running and cleaning.
To Next Page
General