Need help?Do you have a question about the Mosconi AS 200.4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Frequency Response | 10 Hz - 30 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| THD | < 0.05 % |
| Power Output (4 Ohm) | 200W x 4 |
| Power Output (2 Ohm) | 4 x 300 W |
| Bridged output power @ 4 Ohm | 2 x 600 W |
| Input Sensitivity | 0.2V - 6V |
| Crossover | LP/HP |
200 Watt per channel @ 4 Ohm < 1% THD+N.
>86 dBA (reference: 1 Watt into 4 Ohm).
Power output for different impedances and modes (e.g., 200W@4 Ohm).
Actual measured power output under specific conditions.
Total Harmonic Distortion and Distortion+Noise across different impedances.
Max/recommended supply voltage, power thresholds.
Bandwidth, sensitivity, impedance, S/N ratio, channel separation.
Damping factor and output impedance at various frequencies.
Load drive limitations and suggested fuse rating.
To Next Page
