11
General user information
Information about using the operation manual
f Before using the appliance for the first time, you must
read and understand the operation manual completely.
f Consider the operation manual as part of the product
and store it in a safe and accessible place.
f Include this operation manual if passing the appliance
on to a third party.
f In the case of conflicts with national safety specifica
-
tions or instructions, the national requirements must be
followed.
Explanation of symbols and notes
DANGER
Danger of electric shock which may result in seri-
ous physical injury or death.
DANGER
Danger of explosion which may result in serious
physical injury or death.
WARNING
Warning of possible physical injury or a health
risk.
CAUTION
Information about danger of material damage.
Note with useful information and tips.
Action to be taken by owner.
Carry out these actions in the sequence
described.
f
1.
Product description
Description of parts (Fig. 1)
A Blade set
B Locking switch for cutting length adjustment
C Cutting length adjustment lever
D On/off switch
E Hang-up loop
F Mains cable
G Blade guard
H Oil for blade set
I Cleaning brush
Not pictured: Attachment combs (depending on model)
Technical data
Drive unit: Quiet oscillating armature motor
Operating voltage: 220 – 240 V / 50 Hz / 60 Hz
Power consumption: 15 W
Dimensions (LxWxH): 180 mm x 67 mm x 42 mm
Weight: 435 g without mains cable
Emission sound
pressure level: max. 60 dB(A) @ 25 cm
Vibration: < 2,5 m/s
2
The appliance is safety insulated and radio screened. It
meets the requirements of EU Electromagnetic Compat
-
ibility Directive 2004/108/EC and Machinery Directive
2006/42/EC.
Declaration of conformity
See page
115.
To Next Page
Loading...
