EasyManua.ls Logo

Motec C125 - Page 2

Motec C125
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page
2
of
12
PWC SSL Handbook
1. INTRODUCTION
This document outlines the implementation of the new Series Spec Logger as it pertains to the 2016
Pirelli World Challenge Series. All GT classes will require a MoTeC logger. This logger must be setup
via the guidelines set forth by PWC as outlined in this document. The Series Spec Logger will be open
for teams to use and configure themselves. Display settings, additional channels and sensors and
logging are all open for the teams to use as they see fit. Most other series around the world have very
controlled loggers, adding cost with no added value to the teams. We hope this program continues to
be open and encourage teams to use the data for driver coaching, system and engine checks and
doing their own compliance checking. This handbook will change and be updated as needed
throughout the year.
Please refer to the Pirelli World Challenge Technical Regulations for a complete list of rules.
2. WHERE TO PURCHASE
Teams are allowed to purchase their MoTeC logger from any North American MoTeC dealer. It is
highly recommended to purchase from a dealer whom you wish to be supported by. Your MoTeC
dealer will be your first contact for all support needs. Installation, setup and training are all things you
should consider in detail when deciding who to purchase from.
All MoTeC loggers will require a setup check before competing in the PWC series. This will help
ensure proper configuration and compliance within the guidelines set forth by PWC and listed in this
document. That check will be done by Christopher Brown of CB-Racing. He will be the main MoTeC
support dealer for the PWC series. If you have any questions regarding the PWC SSL please contact
him through email at: cb@cb-racing.com
3. ALLOWED MOTEC LOGGER MODELS
Any L1xx or C1xx will be eligible for 2016 and beyond. Model numbers include: L120, L180, C125,
C185, C127 or C187. The last digit is the display screen size in inches. The CDL3, SDL3, ADL3 & ACL
are also eligible for 2016, and may or may not be eligible after 2016 due to software or hardware
limitations of future additions to the PWC SSL requirements. The older MoTeC loggers such as the
ADL, SDL and ADL2 are not eligible.
Essentially the newest range of MoTeC loggers will have all of the features required for PWC in the
foreseeable future. The older MoTeC dashes can not be upgraded with regards to certain functionality.
Hence some are eligibility for 2016 but not guaranteed beyond 2016.

Related product manuals