PWC SSL Handbook
Option List for Loggers:
These options may be enabled at any time, and never expire on the logger purchased for.
I/O Options: Activates additional sensor input pins on the back of the dash. On the 12x series
loggers this option is required for measuring boost pressure, but may not be required for normally
aspirated cars where all the required data is being streamed through the CAN bus. On the 18x series
loggers a number of inputs are already included. See table above for Analog Sensor Inputs.
Pro Logging: All data files created on MoTeC loggers can be opened in i2 Standard analysis
software. This software is free to download from the MoTeC web site. The Pro Logging option enables
data files created by the logger to be opened using i2 Pro analysis
software. The Pro software is also free to download and adds advanced
functions like shock histograms, advanced math equations, unlimited
graphs and worksheets, setup sheets, etc. i2 Pro only opens pro files, i2
Standard will open both Pro and Standard data files.
Memory / USB: This option doubles the onboard logging memory
and on newer dashes it also enables the external USB logging. Beginning
in 2016, all MoTeC L1xx and C1xx loggers will have the ability to utilize a
USB memory stick. Older models won't have USB but will have the
additional memory increased when buying this option.
L120 C125,C127
17 I/O $ 400 $ 400 enables sensor inputs and outputs
Pro Logging $ 800 $ 800 enables pro analysis software
250MB / USB $ 525 $ 530 enables additional 120MB logging memory & USB stick
T2 telemetry $ 2250 $ 2250 activates the T2 telemetry data stream *radios extra
L180 C185,C187
44 I/O $ 1120 $ 1300 enables sensor inputs and output
Pro Logging $ 1120 $ 1300 enables pro analysis software
500MB / USB $ 890 $ 1040 enables additional 250MB logging memory & USB stick
Adv Functions $ 890 $ 1040 enables advanced math, timers, tables
T2 telemetry $ 2510 $ 2925 activates the T2 telemetry data stream *radios extra
Optional SLM - SHIFT LIGHT MODULE
The MoTeC SLM features bright multi-color LEDs which are ideally suited for a multitude of functions
such as shift lights, warning lights, yellow flag lights or brake lockup lights. This is the perfect way to
increase the functionality of your MoTeC logger to help the driver. It is easily adapted to any MoTeC
logger with or without a display. For many installations the steering wheel blocks the built in light array.
An external light module is easily mounted further up on top of the dashboard where it can be in the
peripheral view of the driver. Cost is $585.
To Next Page
Loading...
